3M AVW - Certified, Authorised & Approved.


3M AVW - It's A Wrap UK - 3M Authorised Vehicle Wrappers - Certified in Vehicle Wraps by 3M - 3M Status

It's A Wrap UK have the 3M Status.

We are 3M AVW certified and recognised in the industry as one of the Top UK vehicle wrapping companies and one the preferred set of application technicians for the South Coast.

We have the 3M status of being authorised and trained by 3M in the print and application of their wrapping films, materials and vinyl materials for all graphics, signage, vehicle wraps and applications.

Why 3M.

Global Brand, Local Support

3M are a quality brand trusted worldwide with operations on a global scale. We also boast a local based sales team and technical service to support our network of 3M AVW's.

They are a global company with a local presence. Some of the biggest global brands trust and use 3M products every day. And of course, there is always the 3M warranty for peace of mind if anything was to go wrong through no fault of your own.

Lasting Performance

3M products which have been fitted correctly by one of our 3M Authorised Vehicle Wrappers should last in accordance with their durability rating. This is highly dependent on the quality of the painted surface beneath and also the type of film and vehicle.

The painted surface of the vehicle needs to be in good order, any rust, cracks or areas of damage can affect the wraps performance. Seek advice from your installer prior to installation if you have any doubts.

Founded on innovation

3M is fundamentally a science-based company. Having invented such adhesive features as Controltac to allow for repositionable graphics and Comply for bubble free finishes, 3M have years of experience in developing vehicle personalisation and protection products that ensure you get the most up to date technology along with the best quality finish.

Breadth of Products

3M produce thousands of imaginative products, and are a leader in scores of markets - from health care and highway safety to office products and abrasives and adhesives.

Their success begins with our ability to apply our technologies - often in combination - to an endless array of real-world customer needs. For example, your paint can be prepared with industry leading 3M products, protected with 3M VentureShield, then cared for and maintained with 3M Car Care products.

Of course, all of this is made possible by the people of 3M and their singular commitment to make life easier and better for people around the world.

Sustainability

3M's strategy for sustainability encompasses the pursuit of customer satisfaction and commercial success within a framework of environmental, social and economic values.

For additional information on how 3M as a whole embraces the principles of sustainable development, our efforts are discussed in depth in the 3M Sustainability Report.

Paint Protection Films


3M™ VentureShield™ virtually eliminates the risk of stone chips, scratches and paint damage to your car, while helping to retain its residual value. Made from optically clear, extremely tough urethane film, a digitally-designed, bespoke template for your car will be fitted by specially-trained installers, to achieve the protection you need for your bumpers, headlights, wings, wing mirrors and bonnet. You can even choose to have your whole car covered for total peace of mind. Motorbike kits are designed for a DIY fit at home. Contact one of our trained and approved installers now for more information and a quote.

[Click Here] For our 3M VentureShield Paint Protection Page.

Cars, Vans & Most Vehicle Types

We've been designing templates and manufacturing VentureShield for many years, so we have a great understanding of vehicle contours, and we can produce a templates for any vehicle with optimal coverage and protection. Whether you want standard coverage to protect the most vulnerable areas of your car from damage, extended coverage to fully wrap your bonnet for improved aesthetics, or even full vehicle coverage for ultimate car paint protection, we have a protective film solution for you. Our dedicated template engineers produce bespoke designs for each make and model of vehicle as soon as they hit the road, helping you to have total peace of mind, knowing that the kit will fit perfectly first time, with no cutting of the film on the car needed. 

We only sell VentureShield through a national network of trained and approved installers, so you can have confidence in the standard of work they carry out. Whether on a supermini, family hatchback or supercar, the level of care and attention that they deliver is second to none. Contact your nearest Approved Installer now for more information.

Motorbikes

As opposed to car kits, which have to be professionally installed due to their complexity and size, bike kits are specifically designed to be DIY fit and easy to install. The areas they cover are generally quite small, so there is much less complexity in the shapes and contours they fit around. The coverage still means you get optimum protection against chips and scuffs but you benefit from reduced cost, being DIY fit. Most makes and models of bike since 2000 have a specific template already designed and we continue to produce new ones each week. We try and get hold of press bikes or demo bikes, so we can see each and every area that gets damaged and then make a corresponding template.

With the increasing popularity of matte paint finishes, we also have a matte film, so that you get the same levels of protection but are able to maintain the matte finish of the bike. Contact one of our approved installers to find out how you can purchase a DIY motorbike kit for your motorbike. approved installers

Motorsport

Taking part in motorsports means higher speeds for your car or motorbike, with more debris and potential for surface damage, which can be costly to repair, especially on carbon fibre panels. VentureShield is tested and used at the pinnacle of 2 and 4 wheel motorsport and has a race-proven heritage all around the world. Whether you want to protect the sponsor’s logos from getting damaged, or stop debris from taking chunks out of carbon fibre panels, VentureShield will ensure you’re on the track for longer, rather than in the paintshop.

We only sell VentureShield through a national network of trained and approved installers, so you can have confidence in the standard of work they will carry out. Whether on a supermini, family hatchback or supercar, the level of care and attention that they deliver is second to none. Contact your nearest approved installers now for more information.

Other uses

When you have a need for surface protection, chances are you need VentureShield. It's used on pleasure boats and super yachts to prevent abrasion from fenders and ropes, as well as being applied around the scum line to prevent unsightly stains on the hull, and make cleaning easier.

VentureShield is also used on mobile phones, sports equipment, watches, ski helmets, wake boards, jet skis, and even surfboards! These are non-standard applications and we probably won’t have a template for it, but by using raw material and making your own template, you can still get the same benefits as standard applications.

Contact your nearest installer for more information and pricing. They can advise on how much material you’ll need, and the best way to create a template for your specific application.



About us - Sub Menu

our
standards

We strive to bring you the very best service and quality workmanship at a consistently high level. Our production team regularly attend 3M accredited courses and keep up with top end industry technology and techniques in order to achieve this.



our
principles

Listening to the needs of our customers, offering good product advice and maintaining high customer service levels is our priority. We want you to leave happy… and we want you to come back! Growing longstanding relationships and understanding our customers is important to us and excellent communication is key. We are here to help you to realise your vision.



premium
quality

We will always use the best materials for each job we undertake. We will not cut corners or falsely economise on cheaper materials in an attempt at cost cutting. The work that we produce will be representing your business and as such, needs to look professional and attract attention for the right reasons.



Full Car Wrap Colour Change
& Striping to BMW z4.

Full vehicle wrapping and colour change to a BMW Z4 including door shuts and striping digitally printed with uv laminate. Take a look at the video to see the full process unfold.

6 Great Reasons to choose us.

01.
3M approved vehicle wrappers.
02.
15 years industry experience.
03.
Top quality workmanship using tried and tested methods.
04.
Professional and attentive team of designers and fitters with exceptional customer service skills.
05.
Excellent value for money - various design/installation packages to suit your budget.
06.
An extensive portfolio of work with excellent testimonials from respected businesses up and down the country.
Contact us now!


Mirror Gold Chrome Car Wrap - Slider